Paint Concrete Floors

Painting concrete floors is task that many may want to perform but lack information on how to go about it. By painting concrete floors, you enhance their appearance by adding color and they appear beautiful. Preparation is very crucial when undertaking this project. You should be ready with the construction tools and be mentally prepared because the project may take long.

Before embarking on the project, you should make sure that the room is well ventilated. The next step is to clean the surface thoroughly using a degreaser to do away with tough stains. You should also fill any holes and cracks in the floor. Note that cleaning is the most crucial part when it comes to the preparation process for painting concrete floors.

After cleaning and filling cracks then you should fix a tape over the base boards if you do not want to paint them. Make sure the floor is dry and if there is moisture consider purchasing a sealer. Apply the first coat 10% thin to make it able to soak into the surface as deep as possible. As stated earlier painting concrete floors calls for patience; after the first coat you need to apply two more for a gloss finish.

After application of the first three surfaces, the time comes to apply the sealer. Wait until it has dried and then apply a primer. If the primer is dry then you can start painting. Use a roller for open areas and a brush for the tight areas. When painting concrete floors, you should always remember to paint in the direction of the doors in order to avoid closing your self in the newly painted house.

Although painting concrete floors may seem like an easy task, there are many factors that could make you spoil the work. You must first check the floor for curing compounds, which will make the paint fail to adhere to the surface. You also have to eliminate any moisture before you can paint and also check to ensure that the texture of the surface feels like a medium sand paper.

If you are a novice at painting then buy enough paint to give the surface many covers. You should also have a sealer and a primer. Before painting concrete floors in whatever circumstances, you should always stir the paint well and use a roller preferably to a brush. It is advisable that you start painting the edges first with a brush and then use the roller later.

When it comes to painting concrete floors, you also need to know how to select paints. Epoxy paints are the best for concrete floors but if you want your floor protected from chemical spills then you can consider a gloss finishing. Choose your colors wisely and then remember that even though the painting takes time, it adds greatly to your investment.